Description
FS Series 10W ±200V to ±6kV
Proportional DC to High Voltage DC Converters
The new FS Series of isolated, proportional DC to high voltage DC converters offers stout design and enhanced features for excellent long-term reliability. Outputs ranging from 200V through 6kV are offered in miniature, cost-effective, PC-mount packages. Based on XP EMCO’s proven highreliability, high voltage power conversion topology, the FS Series boasts a full ten watts of output power for each model and features a low 0.7V turn-on voltage. The output voltage is proportional to the input voltage, from turn on to maximum output voltage, enabling easy control of the high voltage. XP EMCO’s proprietary, quasi-sinewave, resonant oscillator produces clean, reliable high voltage with inherently low ripple, low EMI/RFI, low input ripple current, and low conducted emissions. The frequency of the oscillator is stable throughout the operating range, allowing for easy additional filtering, and always operates well above the audio frequency range.
This series features sturdy, galvanic input-to-output high voltage isolation, conservatively rated at +/-2,500V + Vout with less than 100pF of coupling capacitance and less than 100nA of leakage current. Robustness and high reliability have been designed into each model by incorporating output arc surge current limiting and short circuit protection. Careful control over internal voltage gradients extends the useful life calculated. Mean time between failure (per Bellcore TR-332) exceeds 840,000 hours.
Features
- Isolated Output Voltage is Proportional to Input Voltage
- 10W in Compact Package With Smart Features
- Low Turn On Voltage: <0.7VDC
- 100V to 6kV Output Voltage
- Positive or Negative
- Very Low I/O Leakage Current
- Reversible Polarity
- Low Noise, Quasi-Sinewave Resonant Oscillator
- MTBF>840 Thousand Hours
Applications
- Electrostatic Chuck
- Mass Spectrometry
- Electro Adhesion
- Electrostatic Precipitators
- Electrophoresis
- Capacitor Charging
- Ignitors/ Spark Ignition
- Ion Pumps
- E-Beam/Ion Beam