| AC Input Voltage range | 85 – 265VAC (47 – 63Hz), 300VAC for 5 seconds |
| Power Factor (100 / 200VAC) | Meets EN61000-3-2 |
| Input Current (115/230VAC) (typ) | See Datasheet |
| DC Input | See Datasheet |
| Temperature Coefficient | <0.02%/°C |
| Regulation | See table series |
| Overcurrent Protection | >105%, 5V & 12V constant current limit & hiccup autorecovery, 24V &48V constant current limit with autorecovery |
| Overvoltage Protection | 115-140%, Cycle AC line to reset |
| Hold Up Time (typ at full load) | 20ms |
| Leakage Current (max) | 750uA maximum, typically 175uA at 115VAC, 63Hz |
| Operating Temperature (1) | -10° to +70°C, derate above 45°C for 50W, 40°C for 100W & 150W, 50°C for 300W & 600W (see graphs below) |
| Storage Temperature | -30° to +75°C |
| Operating Humidity (non condensing) | 30 – 90 |
| Storage Humidity (non condensing) | 33147 |
| Withstand Voltage | Input to Ground 2kVAC, Input to Output 3kVAC, Output to Ground 500VAC for 1 min. |
| Isolation Resistance | >100M at 25°C & 70%RH, Output to Ground 500VDC |
| Vibration (non operating) | 10 – 55Hz: 19.6m/s2 (sweep 1 min) X, Y, Z for 1 hour |
| Shock | < 196.1 m/s2 |
| Safety Agency Approvals (2) (3) | UL60950-1, CSA60950, EN60950-1, UL:508, CSA C22.2 No.107.1-01, CE Mark |
| Conducted & Radiated EMI | EN55011 / EN55022-B, FCC Class B, VCCI-B |
| Immunity | IEC61000-4-2, -3, -4, -5, -6, -8, -11 |
| (1) RWS600B operates down to -20°C. (2) UL508 & CSA C22.2 No.107.1-01 on RWS50B-5, -12, -24, RWS100B-5, -12, -24, RWS150B-5, -12, -24 & RWS300B-24 only. (3) Consult Sales Office for use under DC Input conditions. |
