Description
RMS-100 – Remote Monitoring System
RMS-100 – The baby RMS; Is a unique remote voltage monitoring, data acquisition, and control device specifically designed for use with battery powered wireless internet repeater sites, or other AC & DC powered remote equipment. RMS-100 Has ultra low power consumption and won’t put a drain on your power source. Uses only 1.2 watts! RMS-100 Is powered by DC voltage from 10 to 60 volts. RMS-100 Uses embedded Ethernet technology for internet data acquisition and remote voltage monitoring. RMS-100 Uses the LINUX operating system for versatility, stability, and security. RMS-100 Gives you the situational awareness you need to keep your equipment operational and reliable.
Main Features
- Six layer PCB with Nickel Immersion Gold plating and red solder mask.
- 400 – MHz Arm Processor (500 Mips !).
- 256 – megs of Nand Flash. Create and store custom applications.
- 64 megs of SD-Ram.
- Dual Low Noise Switching Power Supplies accepts 8 – 60 vdc input. Can be powered directly from 12, 24, or 48 volt battery banks.
- Battery backed-up, real-time clock.· One onboard temperature sensor –25c +100c.
- Three 24 bit isolated voltmeters (+/- 100 VDC). Each voltmeter has its own 24 bit Delta Sigma ADC.
- Each voltmeter can be put into low voltage shunt mode (+/- 2 VDC).
- Two Power Relays for devices using 1 – 240v -5 amps AC/DC current.
- Four general purpose I/O pins.
- Five dedicated alarm pins.
- One console serial port.
- Two USB 2.0 ports for cameras, wireless clients, extra Ethernet, etc.
- Runs real Linux! 2.6.33 kernel.
- Send SMS messages, Email alerts, SNMP traps, Remote Syslog Messages.
- Ping watchdog, power cycle equipment after a set amount of ping timeouts.
- Command line utilities: ping, ftp, email, relays, etc.
- Flash new firmware over the internet.
- Duel Watchdog Reset circuits, processor integrated, and extra hardware.
- Control RMS-100 via web page, telnet, ssh, or snmp.
- Full SNMP v1, v2, v3 support (default v3).
- Supports external USB relays and voltmeters.
- Hardware is user accessible from files on the board.
- Make your own utilities and scripts to upload. (Bash, PHP, Python, Lua)
- Pluggable connectors for ease of use.
