Description
Military Field-Grade Uninterruptible Power Supply (UPS)
Rugged Power Backup with Lithium Polymer Batteries
SynQor’s Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC output to the load. The use of lithium polymer batteries permits the lowest profile and lowest weight solution in its power class. It is designed to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M redundant systems.
UPS Product Features
- Sealed, weather-proof, shock-proof construction
- Military Tough, Die-Cast Aluminum Chassis
- 1250W-1500VA; 2500W-3000VA output power
- >10 minute run-time at full power
- Full power operation -20°C to +55°C
- Shallow Rack full power operation -20°C to +50°C
- Storage temperature: -40°C to +65°C
- True on-line double conversion
- Hot swappable internal battery pack (lithium polymer)
- Universal AC input: 80-265VAC; 47-65Hz
- Dual input: AC and optional DC
- Cold-start with no AC or DC input connections
- Power factor correction at AC input
- Pure sinusoidal AC output voltage
- Handles 0.0 – 1.0 power factor loads and non-linear loads
- User I/O and Configuration signal ports
- Up to 3 units can be combined for higher power, voltage or a 3-Phase AC output
- Up to 32 units can be combined to form a higher power fault-tolerant, glitch-free system, perhaps with N+M redundancy, by ordering with the “AC Output Electronic Breaker” option and the appropriateconfiguration cable
Specification Compliance
UPS units are designed to meet:
- MIL-STD-704F – Aircraft Electrical Power Characteristics
- MIL-STD-1399-300B – Interface Std for Shipboard Systems
- MIL-STD-1275D – Vehicle Electrical Power Characteristics
- MIL-STD-461F – Electromagnetic Interference
- MIL-STD-810G – Environmental Engineering Considerations
Options
- DC input (28Vnom) for dual source
- 1U Extended battery packs, compatible with UPS-1250, UPS-1500, UPS-3000
- UPS-1250/1500-H-1U >13.5 minutes of run-time
- UPS-1250/1500-M-1U >16 minutes of run-time and -40C full operation
- Wide-range AC input frequency: 47Hz to 800Hz
- 115Vrms or 230Vrms AC output
- 50Hz, 60Hz, or 400Hz output
- DC1: Auxiliary isolated DC output (up to 500W each)
- DC2: High power DC output parallelable for higher power (UPS‑1500 up to 1250W; UPS‑3000 up to 2500W)
- Total AC & DC1 & DC2 output power UPS-1500 = 1250W
- Total AC & DC1 & DC2 output power UPS-3000 = 2500W
- Shipboard version with floating neutral wire
- N+1 Redundancy
