Description
SR250HL – 250W
Standalone DC Power Supply / Battery Charger
The SR250HL range is designed for use as a reliable and stable AC to DC power supply, or float charger for lead-acid batteries. Note that for float charging the output voltage must be set to approximately 15% above the nominal battery voltage models. This is done as the default voltage for the 12V model but must be specified at time of order for all higher voltage models.
All our range of DC Power Supplies can be assembled into a rack mount chassis. Meters, diodes, surge protection, special terminals and power distribution breakers can be added as well.
See below an example of our SR250HL Battery Chargers installed with dual ( N+1 ) configuration and front DC Distribution breakers of 5A each one.
Points Of Difference
- Ideal for standby float charging of lead-acid batteries
- Convection cooled, except for 12VDC models
- Constant current limit and Precise voltage control
- Temperature compensation option
- Efficient modern “current mode”
- Relay Alarms Output
- Suitable for parallel operation
- Rugged design and construction for long life and challenging environments
Applications
- Security – Access Control
- Industrial Processes
- Switching Protection
- SCADA
- Radio Repeaters – Remote Sites
Optional Features
- American Input Voltage 110 VAC ( 88 – 135 VAC)
- 12VDC Fanless Option rated at 210W up to 50°C
- 110VDC (88V – 135VDC) Input Voltage – can be used as a DC-DC Converter
- Communication Port ( RS232 ASCII – SR485 – MODBUS RTU – SNMP, webpages)
- Digital Input/Outputs: Customizable 2 digital inputs & 1 digital output.
- Mounting: 19″ Rack Mount with V/I meter available or wall mount
- N+1 redundancy
- Boost Charger
- Conformal coating
