New Dual Output DC Power System for Wireless Communications Networks
48V And 24V DC Power System With Integrated 12V Or 24V DC Converter Managing your backup system and critical loads with two different voltage levels is now possible with the new ICT Hybrid Ultra and ICT Hybrid Power Series. The dual output voltage configuration brings more flexibility while maintaining a high level of reliability with the standard battery management features and ethernet enabled monitoring capabilities. The new series are ideal for restricted space applications where the primary DC voltage is positive or negative 48V or 24V DC, and auxiliary voltage of 12V or 24V DC is required to power certain devices at the site. ICT Hybrid Ultra Series Up to 7500W output Power 700W/1500W AC-DC Power modules – 48V or 24V DC output 700W DC-DC Converter Module – 12 VDC output Dual 100 amp battery breakers with battery management module 4 or 8 fully managed load outputs Digital and analog inputs for temperature and site sensors Full range of certifications including CSA/UL, FCC Class B, CE, ROHS ICT Hybrid Power Series Up to 3000W output Power 700W/1500W AC-DC Power modules – 48V or 24V DC output 700W DC-DC Converter Module – 12 VDC output Dual 100 amp battery breakers with battery management module Digital and analog inputs for temperature and site sensors Full range of certifications including CSA/UL, FCC Class B, CE, ROHS Applications Two-way Communications Networks Trunked Radios Systems Backhaul DAS SCADA Security & Surveillance Main Features of Modules Integrated Intelligent Control Module – ICM Controller TCP/IP remote Ethernet communications for monitoring and control Embedded web server for plug and play set up HTTP/HTTPS, SMTP, SNMPv1/v2c/v3 protocols supported AC input voltage, DC output voltage, system current reporting (local and Ethernet) Four site monitoring sensor inputs with alarm reporting Local and remote output voltage and current limit adjustment Up to 30 days logging at 1 minute sampling rate, csv file download, major event logging Integrated Load Distribution Module (just for Hybrid Ultra Series) Display current reading of each of four load outputs Remote on/off control of individual outputs or entire load bus over Ethernet User definable alarm level indications (sent via Form C and Ethernet) User-definable load disconnect and reconnect levels Definable automatic load shedding Auto-ping automatic power cycling of specified load outputs Power-up delay sequencing Battery Management Module Temperature-compensated charging Display of battery voltage status Battery current, state of charge, run time remaining reporting Adjust LVD settings Configure advanced battery management features such as Boost charge parameters Max charge current Battery capacity Battery test timer Battery discharge test cut-off voltage. This features are available with Lead Acid batteries. The modular series is compatible with Lithium-ion batteries but battery monitoring and reporting is done by the battery itself. (read Using DC Power Supplies and Battery Chargers with Lithium-ion batteries for more info) Contact Us For Technical Assistance For technical support about our off the shelf products and customised power conversion solutions, get in touch today. Contact Our Engineering Team
Helios introduces new programmable AC Power Sources
Helios has introduced three new programmable AC power source solutions, designed for research projects and testing critical applications. The new range complements Helios’ other power supplies for Automatic Testing Equipment (ATE), and is ideal for universities, laboratories, national research institutes, and critical manufactures. Reliable, flexible and easy-to-configure, the new systems can support research and testing across a wider range of science and technology critical applications, including: Country Safety ( Electrical testing for military environments) Health & Medical (Vaccine, Biomedical, Nutrition) Natural Environment (Atmosphere, Biosecurity, Oceans, Natural resources) Technology (Astronomy and space, Robotics, Cybersecurity, Renewable energy) Industrial Manufacturing New range promises efficiency, reliability and cost-effectiveness. The SP-300, SPS300 and SPTS range of AC power supplies are single phase and three phase power sources. They provide high power density, high reliability and high precision features in 2U/ 3U/ 4U/ 9U/ 17U/ 21U form factor from 600W up to 20kW. AC and DC mixed or independent output modes for voltage DC offset simulation Control via touchscreen or digital control interfaces Standard RS232 & RS485 and optional LAN & GPIB. Support both SCPI (Standard commands for Programmable Instruments) & MODBUS communication protocols Compliance testing to IEC 61000-4-11 / IEC 61000-4-14 / IEC 61000-4-28 / IEC 61000-4-13 Phase angle dimmer simulation Power line disturbance simulation High output crest factor which satisfies surge test requirements Output frequency 15-1000Hz, capable of setting output slope of voltage and frequency Combine units for multi-phase configurations Built-in power meter, which can measure 15 electrical parameters per phase, including voltage, current power, etc. Measure up to 40 orders of the voltage of current harmonics (SP 300 model) New Series of Single Phase & Three Phase AC Power Sources SP-300 1Ph Programmable AC Power Source 2.8A – 48A / 150VAC – 300VAC / 600W – 5kW Read more SPS-300 3Ph/1Ph Programmable AC Power Source 2.52A – 165.6A / 150VAC – 600VAC / 1.2W – 20kW Read more SPST 3Ph/3Ph Programmable AC Power Source 2.8A – 46A / 150VAC – 300VAC / 1.2kW – 15kW Read more Helios commitment to supporting science and technology The science and technology sector are vital to our country’s success. The sector plays a crucial role in improving our natural environment, economy, and quality of life. It also helps to protect people against natural disasters and climate change. That’s why Helios works closely with research institutes and technology centres. We understand the sector’s needs and provide fit-for-purpose products, supported with on-the-ground expertise and service, and a robust supply chain. We believe if we do our job well, the sector can reward Australia with new knowledge, discoveries, and patents. And this will increase the resilience and autonomy of Australia’s economy and safety. For technical support about our off the shelf products and customised power conversion solutions, get in touch today. Contact Our Engineering Team
Smart Variable DC Power Supply 6kW-36KW
The SP HP Variable DC Power Supply is the ideal product for a wide range of testing, OEM and manufacturing processes applications. It offers 6-18kW in 3U rack and 24-36kW in 6U rack with single or three phase input options. SP HP can operate in constant voltage, constant current and constant power modes and have adjustable voltage/current slew rate. RS485/RS232/USB communication interface (standard), LAN&GPIB communication interface (optional), CAN communication interface (optional). Check out below some of the unique features of the SP HP Variable DC Power Supply and contact our team of engineers if you require further information. SP HP Adjustable and Variable DC Power Supply 6kW – 36kWAC/DC Power Supplies, Laboratory AC/DC Power Supplies Smart Functions Graphical User Interface The large color touch screen provides simple and fast operation for customers, real-time update of display output data and power status. The actual values are properly displayed, so they can be read from a large distance. Wide Input Voltage Range & High Power Density 3 phase input voltage range from 187-460VAC meets worldwide voltage regulation. 36kW in just 6U. Three phase input applications, no problem at all!!! Check below how to install three 6kW units or three 12kW to obtain a balanced current drawn on the 3-Phase AC mains. CC & CV Priority This series power supply provides CC/CV priority function allows the user to select suitable mode correspond to test requirement, let the output be voltage high speed or current no overshoot mode. Below shows an application of CC priority to avoid current overshoot during LED test. Adjustable Voltage – Current Slew Rate Providing adjustable rise and fall slew rate setting for voltage and current. DDS Arbitrary Function Generator Equipped with a true function generator which can be generate typical functions as displayed below, it is convenient for editing or directly recall. Besides, this arbitrary generator is accessible for the creation and execution of any complex sets of functions, which can be used for testing in development and production. Built-in Standard Automotive Testing Curves Built-in German DIN40839 standard voltage curve and the international standard ISO-16750-2 pulse waveform. The fast rise/fall time together with arbitrary function generate ability make it truly simulate the influence on the performance of automotive electronics. Solar Panel I-V Curve Simulation Function To simulate the output, I-V characteristics of a solar array includes curve more, use-defined mode and SAS mode. With user-defined mode, user can shape and I-V curve by entering up to 4096 points to simulate dynamic cloud cover effect which is useful for MPPT performance evaluation on PV inverter. Continuous Source & Sink Function (optional) Additionally, to the source mode, this Lab Power Supply is equipped with electronic load, also called sink mode, to absorb power. So, the PS work as a two-quadrant power supply. The switching between these two operating modes occurs without interruption and time loss, thus avoiding overshoot of voltage or current. Use APM DC Electronic Load to Expand Loading Capability Additionally, to the source mode, this Lab Power Supply is equipped with electronic load, also called sink mode, to absorb power. So, the PS work as a two-quadrant power supply. The switching between these two operating modes occurs without interruption and time loss, thus avoiding overshoot of voltage or current. Smart 3-Stage Charging Algorithm Simulation Testing and designers’ engineers can directly recall the default curves or change the switching conditions at different charging stage (bulk, absorption, or float stage). Through optimizing hardware, the current passing from the battery to power supply will be less than 10 mA at any battery voltage when turn off the power supply. It can effectively prevent the power supply from sucking the battery current even without anti-reverse irrigation equipment. Battery Simulator Function Built-in typical battery internal resistance curves and discharging curves can easily simulate battery status in real case. Related Products For technical support about our off the shelf products and customised power conversion solutions, please get in touch. GET TECHNICAL SUPPORT FROM OUR TEAM OF ENGINEERS IN AUSTRALIA
IEC 61850 Converter to monitor HE OPUS Battery Charger Systems via SCADA Network
IEC 61850 is a widely used standard for the design of substation automation systems and applications, or usually known as the international standard for communication in Substations. Substation engineers have become familiar with this standard overt the last years. The following links provide an excellent snapshot of it. Advantages of IEC 61850 Technical Overview and Benefits of the IEC 61850 Standard for Substation Automation IEC 61850 Converter to monitor OPUS Battery Charger Systems via SCADA Network Helios Power Solutions Group have been providing DC Power Systems over the last 35 years and Electrical Substations is one of the main critical applications where our DC UPS have been installed. Battery charging systems in substation provides security and reliability for critical DC loads such as SCADA System, protection, telecontrol systems, automation and signalling units, measurement and monitoring units and more critical equipment that represent the core of any distribution and transmission substations. We are thrilled to announce you that ENEDO Power Systems integrated by Helios Power Solutions Australia can now be communicated to SCADA systems via the IEC 61850 protocol. The IEC61850 standard enables integration and interoperability of equipment from different manufacturers which, in turn, can reduce the costs of wiring and engineering time, as well as improve system commissioning and maintenance tasks. Check Out Some Of Our Industrial DC Power Systems Solutions Using OPUS DC Power Components OPUS DC Power Solutions Dual 3.2kW Battery Charger System 110VDC with 40Ah Battery Banks Efore’s new IEC61850 converter has been developed in partnership with WAGO and provides IEC61850 SCADA compatibility via the WAGO controller which is connected to the OPUS system by Modbus. The IEC61850 converter can be installed inside Efore’s racks or cabinets providing full data measurement of system voltage, battery and load currents, alarms and other relevant parameters for battery backup systems. Additionally, an external IEC61850 converter can be connected to already installed OPUS systems and provide SCADA compatibility in existing installations. The addition of the new IEC 61850 converter into new and existing installations enables systems to communicate with other manufacturers’ devices that also support this standard, providing valuable interoperability critical to substation operations. Key functions include Energy Save mode, rectifier runtime counter, alarm configuration, real time clock with battery backup, inventory management and more. The VIDI+ controller can support up to 47 rectifier modules. Battery Health Diagnostics and Improved Battery Monitoring Features Added to VIDI Controllers Last but not least, based on customers feedback new features have been added to the VIDI Controllers including including Battery Lifetime Diagnostics, Battery Connection Quick Test and User Programmable Pre-warning and Critical Alarms. For technical support about our off the shelf products and customised power conversion solutions, please get in touch. GET TECHNICAL SUPPORT FROM OUR TEAM OF ENGINEERS IN AUSTRALIA Opus DC Power Systems & Accessories OPUS HE 7U Modular Battery Charger Up To 6kW Read more OPUS HE 12U Modular Battery Charger Up To 20kW Read more OPUS HE DC Power Systems MHE Rectifiers 2000W Read more OPUS HE OC0864 Wall Mount DC Power System 4.5kW – 12kW Read more OPUS HE WMC Convection Cooled Battery Charger 2kW Read more OPUS EDC Modular DC/DC Converter 500W to 10kW Read more OPUS DAC60000 Modular DC/AC Inverter 1-24kVA Read more OPUS MVPS Modular Industrial UPS System DC 4kW, AC 3.6kW Read more VIDI2 System Controller Read more OPUS HE DC Power Systems OC2066 24V – 220VDC Read more
ICT Platinum Series Is Now Available with Lithium-Ion Battery Support
ICT Platinum Series 1U Rack Mount DC Power Systems has been improved and now supports lithium-ion batteries. Using the built-in web-based graphical user interface (GUI), or front-panel display and keypad, users can select either lead acid or lithium-ion battery types, depending on which they plan to use in their application. The Platinum Series is an ideal DC Power Solution for wireless communications professionals who demand Intelligent, Ethernet-enabled high efficiency space-saving DC Power Supplies/Battery Chargers for Land Mobile Radio, broadband, and network communications equipment. 12V, 24V or 48VDC output voltage options with 800W or 1600W of output power in a 1U Rack Mount Chassis with 90 to 93% efficiency TCP/IP Ethernet is standard on every model and provides complete and easy-to-use remote monitoring and control of the power supply using its built-in web server Enhanced security and reliability features including SNMPv1/v2c/v3, TLS 1.2, conformal coating, and extra high margin components designed for long life and enhanced durability Remote communications maintained even when AC mains power fails Available battery backup and LVD with adjustable disconnect and reconnect voltage setpoints Available battery backup and LVD with adjustable disconnect and reconnect voltage setpoints Adjustable battery charge current limit Platinum Series – Battery Charger/ DC UPS: 800W – 1600WDC UPS System, Battery Chargers, Standby Applications Battery Chargers, Security Industry Battery Chargers Related Products 12V Modular Power Series DC Power System: 700W – 4900W Read more PRO 1U Rack Mount Battery Charger/DC UPS: 690W – 1200W Read more DC Distribution Series 3 Dual Bus 160A, 10-60VDC $863.00 – $1,940.00 Select options ICT180S-12BRC Smart Single Bus GMT Broadband DC Load Distribution Panels Read more For technical support about our off the shelf products and customised power conversion solutions, please get in touch. GET TECHNICAL SUPPORT FROM OUR TEAM OF ENGINEERS IN AUSTRALIA